1. STAIN REMOVER
2. 16 Oz. ,Bronze
3. Removes rust stains from colorfast fabrics, sinks and white toilet bowls

Editorial Review :

"LIQUID RUST" STAIN REMOVERRemoves rust stains fromcolorfast fabrics, whitesinks and white toilet bowlsBronze16 Oz.

Customer Review :

WOW

This stuff is amazing. We went through the first bottle so fast that we just ordered a case (6) of the larger size. Cuts through the rust stains from hard well water keeping fixtures looking like new. I've used it on clothes to remove stains that would not budge with bleach or other stain removers - likely these stains were of the same chemistry as rust. Removes the little rusty rings on carpet that are caused by metal floor glides on the feet. I try it on all sorts of stuff now - like Wd-40 only for different stains.

Rating :

1. 30" Wide Format Paint Protection Sheets for your vehicle.
2. Clear translucent film for Weather Protection and UV Resistance.
3. Applies similarly to decal or sticker using a wet or dry application method.
4. Step by Step wrap kit application instructions available online.
5. Can be heated molded to contours and curves.

Editorial Review :

What is this product? Rshield Paint Protection Film are uncut sheet or rolls of protection film. These sheets can be applied to car, truck or SUV bumpers, hoods, fenders, pillars, trunks and roofs. Protect your vehicle from road debris, insects, weather elements and sand. What are the films physical properties?  Thickness of film plus adhesive: .0042" (0.010668cm)  Application temperature: 50°F to 104°F (10°C - 40°C)  Rvinyl recommends an application temperature of 70-80°F (21° -26°)  End Use temperature after application: -5°F to 194°F (-20°C - 90°C)

Customer Review :

No review yet

1. Chemically reacts to convert rust into a hard black primer sealer
2. 10.25 oz. Aerosol

Editorial Review :

Mar-Hyde One-Step Rust Converter Primer Sealer chemically reacts to convert rust into a hard, black primer sealer. Apply One-Step on rusted surfaces and rust is permanently converted and ready for primer and topcoat. One-Step Rust Converter Primer Sealer is a water-based latex containing rust modifiers, which is designed for application directly over tightly bonded rust on iron or steel. Also proven effective on new degreased or mild steel where flash-rusting has occurred. Shortly after application, the rusted surface will change form white to purple to a stable black coating. A uniform black coating indicates the complete conversion of the rust; white streaks or remaining rust indicates that an additional coat is required.

Customer Review :

rust converter

Item is as described and delivery was fast. Can't ask a lot more than that!

Rating :

Love this stuff

Been using One-Step for years. It kills rust dead in its tracks. Wire brush the loose rust and spray it on. It converts rust into black paint. I do recommend topcoating over it. Typically I would use One-Step, then primer over that, then top coat it. I've used it on cars(frame and body both) as well as tractors.

Rating :

Mar-Hyde - rust convert truck frame

Well, my 2005 truck had a lot of surface rust on the frame, so I thought I would nip it in the bud. I read a lot online about what to use and decided to go with the mar-hyde rust converter.

I used about 2 full cans to rust convert the frame, drive shaft, axles and hitch of 1 mid-sized pickup. I will probably go back and touch up with another can. I tried to avoid spraying on plastic parts, but it doesn't say anywhere that it will hurt plastic or rubber parts. It does say not to spray on any surface that exceeds 200 degrees, so I definitely avoided the exhaust and engine. The body itself looked perfect so I did not use any on the body. It seemed to do a good job. By the day after I sprayed, the rust had all converted to a smoother darker finish.

On the down side, the fumes seem very noxious. I used it outside, on a slightly breezy warm day and the fumes were still strong, especially if you got in the "cloud." I would only use it outside and preferably with some sort of mask and away from children or pets.

I am planning on coating the underside of the truck with fluid film also, but I have not done this yet. I am not planning on painting the frame. Its been about 2 weeks since I performed the initial treatment and I have had no problems.

Well, there is my story about mar-hyde. I am not an expert, but there is my experience. hope it helps someone.



Rating :

1. FUEL TANK SEALER - HALFPINT
2. U.S. STANDARD FUEL TANK SEALER is non-flammable and is environmentally safe
3. It seals pinholes and seams far better than any other sealer and has great intrinsic film strength.
4. Its film coating is non-porous, keeping moisture permanently away from metal and in this way prevent

Editorial Review :

8oz FUEL TANK SEALER

Customer Review :

No review yet

1. cavity wax oil -
2. Meet or exceed OEM specs
3. Water repellent
4. Dries to a thin waxy film
5. protect vehicle and machinery from rust

Editorial Review :

Noxudol 750 / A high penetrating thin liquid rust protecting oil. It is specially formulated for the inner treatment (cavities) of all motor vehicles. It dries to an exceptional thin layer outstanding to battle rust in hidden places.

Customer Review :

Works perfect

I own a Citroen 2cv - a Deux Chevaux - a car notorious for rusting. Recently I had to tear out the entire floor and replace it due to spreading rust, so when I put it back together I made sure to buy rust-proofing products in bulk to help delay having to ever do that much work again.

Noxudol is the best cavity wax that I have found out there. It is perfect for squeezing into those tiny spots where rust likes to start and spread and it holds rust at bay for a long, long time. If you are in the market for a rust-proofer that you can get into teeny tiny spots, this is the one.

Rating :