1. Low air flow restriction
2. Adhesive forms pocket pleat for the filter
3. Urethane soft sealing gasket
4. Mesh support screening
5. Pleated paper filters

Editorial Review :

Wix Cabin Air Filters are designed to circulate clean air inside the cabin. They filter the contaminants down to microscopic size and provide a linear path for low air restriction. These are pleated paper filters and are placed in the outside air intake of the vehicle’s passenger compartment.

Customer Review :

Wix cabin air filter for Honda Civic LX

I'm embarrassed to say that I did not even know my Honda Civic had an air filter for the cabin. My BMW and Audi in the past had them, but I just assumed that the inexpensive Honda did not have anything. When I went to buy an engine air filter on Amazon, I thought it was a joke that they were pairing the item with a cabin air filter. Well, no joke, the Honda Civic has a cabin filter and it's hidden away in a little drawer tucked behind the glove box. It was very easy to replace, once I knew that it was in there. You just open your glove box, push in the sides a little bit so the stoppers will let it swing all the way down, and then you will see the black face of the drawer for the filter behind. It just slides right out, swap out the new filter for the dirty one, and slide it back in. The only thing to watch for is to make sure the arrows showing the flow of air are lined up together. The drawer in the Honda had the arrow for airflow pointing downward, so I made sure the arrow on the side of the air filter was also pointing downward when I installed it.

That's it. Ten minute job at most, even if you take time to explore around behind your glovebox.

Rating :

Wix cabin air filter

Seems to work OK, but I won't know for about a year or more. There's no way to know what doesn't get filtered out, you can only see what's in the filter. If the filter comes out clean, then I'll know it isn't working. The price was excellent though! I'll rate it as a 4 star for the time being.

Rating :

Cabin filter


I replaced my disgustingly dirty filter with this nice Wix cabin filter.

It mounts just like the original on my 06 Acura TL.

RM

Rating :

Excellent replacement for 2006 Civic

This cabin air filter is a perfect fit for the 2006 Civic. I purchased this to replace the original one that was completely clogged up. The airflow is superb and quality is excellent. It was a snap to replace in less than a minute.

Rating :

1. Low air flow restriction
2. Adhesive forms pocket pleat for the filter
3. Urethane soft sealing gasket
4. Mesh support screening
5. Pleated paper filters

Editorial Review :

Wix Cabin Air Filters are designed to circulate clean air inside the cabin. They filter the contaminants down to microscopic size and provide a linear path for low air restriction. These are pleated paper filters and are placed in the outside air intake of the vehicle’s passenger compartment.

Customer Review :

No review yet

1. Fan moves air at 140 cubic feet per minute at 12,000 BTU
2. Includes detailed installation instructions for easy installation
3. 3-speed quiet operation blower
4. Heater size is 10 1/8" by 9" by 5"
5. One year manufacturer warranty

Editorial Review :

The Flex-a-lite Mojave heater is designed to simplify the task of providing heat and comfort to your ride. It eliminates the need to locate hard-to-find parts, or go through expensive rebuilds to get old units in working order. The Mojave gets its heat from the hot water in your vehicle's cooling system (just like an O.E. unit), but has the advantage of fitting into a wide variety of confined spaces. Its compact size, ease of installation and operation make it the ideal replacement unit.

Customer Review :

Great little heater!!!!!

A nice product, appears well made (in USA). Easy to install, easily fits in tight places. Puts out a lot of hot air!! I like it.

Rating :

Mojave Heat for the rear seat

I purchased this heater in order to provide additional cooling for my small block V-8 (addition of coolant to the system, as well as additional heat transfer) and the added benefit of providing heat to the passengers in the back of my FJ40 off road Toy. The unit was too large to mount in the back, but since I purchased the plenum box, I was able to mount it between the bucket seats and aim the 2 1/2" duct to the rear. This has worked out well. My first outing included many hours of steep hill climbing that would normally stress the coolant system, but I was able to crank the rear heat on high (noisy, but drowned out by the V-8) and keep the temp. down to 200 - 210. The unit seams very sturdy and I feel it was a good value.

Rating :

Good Product but isn't as easy to install as it seems

This product works great it's nice to finally have heat in my Jeep but there is noooooo way I could have installed this myself as the direction might lead you to believe. Maybe if you have an old and I mean really old Jeep you can install yourself. I have a 98 Wrangler and I brought it to a custom car shop to get installed and they had a tough time getting it in there. They had to do all sorts of customized cutting and shaping to get it in there. They did a good job and it looks like an original piece of the Jeep now but it ended up costing me $700 bucks to get it installed. They guys there said there's no way an average joe who is a little bit mechanically inclined could have done that alone. It took them 3 days to get it in to make it look good too. It works great but ended up costing me way more than I anticipated in the long run.

Rating :

Heater for my rock crawler

I purchased this heater last year before taking my Poison Spyder Bruiser to Moab, Utah. It was good timing for the heater, the first day it snowed 6 inches on our party. Installation was a breeze. The three (3) speed fan switch works well for regulating heat. I installed a ball valve inline with the water supply so I can turn it off in the summer. Delivers plenty of air flow for any jeep with a rag top. Comes with instructions for an easy electrical hookup. High quality construction. This heater would be a good addition for the rear seat passengers.

I HIGHLY RECOMMEND THIS HEATER FOR ANY VEHICLE THAT NEEDS SOME HOT AIR.

Rating :

Manu defect

Would have given it a higher review if I didn't have to fix it first. Flex a lite put the motor fan assembly in upside down, reversing the blower. Works great....now.

Rating :

More reviews...

1. Low air flow restriction
2. Adhesive forms pocket pleat for the filter
3. Urethane soft sealing gasket
4. Mesh support screening
5. Pleated paper filters

Editorial Review :

Wix Cabin Air Filters are designed to circulate clean air inside the cabin. They filter the contaminants down to microscopic size and provide a linear path for low air restriction. These are pleated paper filters and are placed in the outside air intake of the vehicle’s passenger compartment.

Customer Review :

No review yet

1. Low air flow restriction
2. Adhesive forms pocket pleat for the filter
3. Urethane soft sealing gasket
4. Mesh support screening
5. Pleated paper filters

Editorial Review :

Wix Cabin Air Filters are designed to circulate clean air inside the cabin. They filter the contaminants down to microscopic size and provide a linear path for low air restriction. These are pleated paper filters and are placed in the outside air intake of the vehicle’s passenger compartment.

Customer Review :

fits 04' RX8 perfectly

This is a super easy swap and the product fit my '04 Mazda RX8 perfectly. The package comes with two filter elements in it which replaces exactly the two in the car. You just pull off your glove box, pull open the air filter cover, pull out the two old dirty filters and slide in the two that came in the box. Simple and easy.



Rating :