Lisle 63250 Wide Range Filter Wrench - Tools & Equipment

Lisle wide range filter wrench fits filters from 3 1/8" to 3 7/8". The steel jaws grips the filter without slipping and it works great in tight spots since it works from the top of the filter.

Customer Review :

Thank you Lisle Wide Range Filter Wrench

I got lazy this winter and took my car to the local oil change place. Little did I know that they were going to use an impact wrench to put my oil filter back on. After scraping my knuckles for a half an hour since none of the wrench's I owned had enough clearence to attempt to take off the filter on my Ford Explorer, I saw the reviews on Amazon and went to my local car parts shop where I bought this wrench and had my filter off in 30 seconds. This is the best filter wrench I've ever owned. Thanks again fellow reviewers and Lisle for making a quality product.

Rating :

A Great Oil Filter Wrench

I purchased this wrench and the similar Lisle Import Oil Filter wrench (for smaller filters). I can report that they are both well made, and they both work really well at removing stuck-on oil filters where you only have an "end view" of the filter.
Here are some specific likes:
1) The two jaws, each with two biting "teeth", grip the filters tightly. I put my "three finger" style wrenches (which don't grip nearly as well)into the recycling bin after using this wrench for the first time.
2) The jaws are spring loaded, which holds the wrench in place on the filter while you get in position to turn the ratchet. A nice feature.
3) The harder you turn, the tighter it grips. You may dent the end of the filter a little, but the filter will break free.
4) Between the two wrenches, they cover every size from small lawn tractor filters up through automotive and truck (F350 etc)filters. You don't need a large collection of "cup style" filters. I put a few of these in the recycling bin as well after using this wrench for the first time.

Lisle has solved the oil filter removal issue with these wrenches.

Rating :

toyota camry filter wrench

this wrench does all I want it to do. needed a special wrench for my toyota camry filter housing, saw a review on it, and bought it. great !

Rating :

Best filter wrench that I have

I originally bought an OEM brand one - which was horrible to use. The 3 prong design was hard to keep on the filter and would slip off constantly the second I release the pressure.

This thing stays on once you slip it over the filter. It has never given me any issues in about a dozen oil changes.

The OEM one is in the trash.

Rating :

Oil Filter issues, solution.

If you have a newer vehicle, such as a newstyle Ford F-150 you cannot remove the oil filter by using any sort of band wrench that grips and turns from the side. These newer models and others with tight under hood spacing, do not allow side access, instead they have oil filters that must be gripped end on, like removing a bolt with a socket wrench. That is basically what this item allows you to do, grip the oil filter from the end with a rachet and remove it without crushing the filter, cutting off your hand, or breaking something. This is the best way to access these hard to get at filters. Only downside is you cannot put the new one on using this as it applies force in only one direction, but its not that hard to spin on a new filter by hand (usually). Cheers !! much better than the cheap plastic sockets that slip and refuse to grip the filter. I have been using this thing for many years, and after using everything out there this is the best thing for this application, and its pretty cheap too. I've managed to lose mine after years of use and am ordering another one.

Rating :

More reviews...

Lisle 63600 Import Car Filter Wrench
Price : $13.63 $7.63
Features :

LIS63600 Fits filters from 2 1/2" to 3 1/8".
LIS63600 Removes all oil filters from 2 1/2" to 3 1/8" in diameter.
LIS63600 extra large range enables the 63600 wrench to fit most all import car filters plus the common 3" domestic car filters.

Average Customer Rating :

Editorial Review :

LISLE Import Car Oil Filter Wrench 2-1/2 to 3-1/8in

Customer Review :

Excellent tool

This is the 4th oil filter remover I've bought over the years, and it will certainly be the last. All of these gadgets eventually help to get the filter off, but the big claw and strap types simply couldn't fit into the recessed oil filter area easily. Since the diameter of this tool is just slightly larger than the filter, it fits easily into the tight space where the oil filter is. You'll likely need a socket extension on your ratchet, but you'll only need to a half turn or so with the tool/ratchet and you're in business - no more fighting to get the claw/strap type tool into the tiny space to grab hold of the filter. This is an excellent, simple lil gizmo, highly recommended to any Do It Yourself oil changer.

Rating :

Works Like a Champ!

This is a great tool for removing old oil filters. I've used this on a Honda Accord, Civic and CR-V. Even filters with textured exteriors can be a pain to remove if you get even a little oil on your hands when removing the oil drain plug. This tool works great. You attach it to a 3/8" socket and away you go. As you turn, it tightens the grip and removes the old filter with very little effort. I have nothing bad to say about this tool.

As for the review which stated you can't use this tool to tighten the oil filter, you don't use this tool to tighten the oil filter. An oil filter is hand tight plus 1/4 to 1/2 turn for a tight fit. A person with average strength should be able to tighten the filter without issue. If you need a tool to remove and tighten the filter, then this tool is not for you.

Rating :

A Great Oil Filter Wrench

I purchased this wrench and the similar Lisle 63250 Wide Range Oil Filter wrench (for larger filters). I can report that they are both well made, and they both work really well at removing stuck-on oil filters where you only have an "end view" of the filter.
Here are some specific likes:
1) The two jaws, each with two biting "teeth", grip the filters tightly. I put my "three finger" style wrenches (which don't grip nearly as well)into the recycling bin after using this wrench for the first time.
2) The jaws are spring loaded, which holds the wrench in place on the filter while you get in position to turn the ratchet. A nice feature.
3) The harder you turn, the tighter it grips. You may dent the end of the filter a little, but the filter will break free.
4) Between the two wrenches, they cover every size from small lawn tractor filters up through automotive and truck (F350 etc)filters. You don't need a large collection of "cup style" filters. I put a few of these in the recycling bin as well after using this wrench for the first time.

Lisle has solved the oil filter removal issue with these wrenches.

Rating :

Excellent tool.

Having gotten very frustrated with trying to use the cheap tools available in the local auto parts stores, I purchased this wrench. It works great! The harder you twist it, the tighter it grips the filter. So far, it has removed every filter without crushing the filter.

The only complaint is that the size range of filters that this will fit is limited. You will have to buy at least two sizes of this tool to handle common oil filters.

Rating :

Excellent tool

Our local dealer liked to overtighten the oil filter so that we had to go back to them to get our oil changed. We tried removing the oil filter with the official OEM cap and ended up stripping the cap. Tried the screwdriver through the filter and a hammer but that only tore up the filter housing.

This tool is the only thing that was able to unscrew it. In a world of proprietary plastic parts, here is a metal, fairly inexpensive and well-engineered tool that can work on most makes of oil filters. What's not to like?

Rating :

More reviews...

Hopkins FloTool 10701 Spill Saver Multi-Purpose Funnel
Price : $20.65 $1.11
Features :

Exclusive no-mess splash guard
Extended filler neck opens gas tank trap door
Applications: Trans Fluid, Power Steering Fluid and Gas/Oil Additives and Oil

Average Customer Rating :

Editorial Review :

The Multi-Purpose Funnel fits all sizes of filler tubes.

Customer Review :

Best funnel ever!

This is the best funnel I've owned... ever! They weren't kidding when they said this was "multi-purpose." It's a great addition to my kitchen!

Rating :

excellent product

This funnel, works as advertised. I used it to add an additive to my car's fuel supply.

Rating :

Lisle 14700 Oil Filter Wrench for GM 2.2L
Price : $10.37 $5.85
Features :

Low profile socket greet for confined spaces
Uses 3/8" drive
Not for use with impact wrench

Average Customer Rating :

Editorial Review :

Lisle oil filter wrench removes and installs oil filters on 2.2 liter GM Ecotec engines. The 1.25" low profile socket is specially designed for operating clearance.

Customer Review :

Big metal low-profile oil filter socket

It's a Big, metal, low-profile oil filter socket that my 2007 Saab 9-3 2.0T requires. Coupled with a 6 inch or longer extension, it's an easy job. Socket size is 1-1/4 inch (per markings) or roughly 32mm socket. LOW profile makes it easier to work with given the limited space above the oil filter cap. Fits 3/8 inch rachet sets.
Drove up on the Blitz Rhino Ramp 8000 (cheaper locally at pep boys) and was able to complete the oil change quickly.

Rating :

Handy for what it is designed for.

This socket was designed to remove the oil filter on the GM 2.2 engine. The low profile makes the removal and installation simple. Well worth the money if you are going to change your own oil.

Rating :

Great For Cobalts!

I have a 2008 Chevy Cobalt and getting to the oil filter was a PITA. With this filter wrench I'm able to access and filter and not have to worry about getting a wrench in the small area and possibly stripping the thread on the filter. VERY recommended for Ecotech/Cobalt owners!

Rating :

This thing is awesome!

I fought with vise grips and then I bought a 32mm axle nut from Auto**** thinking I could get my oil filter cover off (2004 Saturn Vue). None of it worked. I was almost to the point that I was just going to have some quick lube place change the oil filter for me every other time the oil needed to be changed.

Then... I stumbled upon this awesome little socket designed specifcally for my GM 2.2L engine. I needed an 8 or 12-inch extension bar to properly reach the oil filter cover (and it hadn't been removed in a while so it needed some "elbow grease", too).

But, now I can change my Saturn's oil filter with ease and style!

Thank you!!!

Rating :

Ecotec Filter Socket

A must for changing oil filters in a Ecotec engine, the low profile socket makes the job much easier.

Rating :

More reviews...

Blitz 05068 Assorted Funnel Set - 3 Piece
Price : $1.97 $1.55
Features :

Pour fuel and other liquids easily
No mess
No wastefull spilling
Made of durable high-density polyethylene
Rust and dent proof

Average Customer Rating : Not yet rated

Editorial Review :

The Blitz assorted funnel set helps you pour fuels and other liquids from one container to another without messy and wasteful spilling. The funnel is made of durable high-density polyethylene, making it rust and dent proof.

Customer Review :

No review yet

More Results : 1 | 2 | 3 | 4 | 5 [Next] [Last]

Questions & Answers

Question : Oil change pump?
Has anybody ever used a pump to change oil through a car's dipstick hole? Do these pumps work well? http://www.right-tool.com/lioilchpukit.html - This website claims that this is the system that Mercedes-Benz techs use, is it true?

Answer:
you still have to get all the oil out. thats alot ofmoney for a plastic container with a hand pump. an electric one might be ok but ,you still have to drain it now and then.

Question : I need help i have been looking up these answers and cant find them. I have been look for one whole week.?
26. It is estimated that over 80% of all products are thrown away after six weeks of use. (1 point)TrueFalse27. The waste material that comes from discarded computer technology items, peripherals, and electronic information devices, such as computers, printers, software devices, and monitors is known as: (1 point)pre-consumer wastepost-consumer wasteE-wasterucksack28. ______ is waste that is left after the consumer buys the product. It is usually the packaging the product came in, a byproduct of the original product, or the product itself. (1 point)Pre-consumer wastePost-consumer wasteE-wasteRucksack29. _____ is the waste that is created in the process of making products. (1 point)pre-consumer wastepost-consumer wastee-wasterucksack30. Compost is a rich soil amendment of organic matter that is made from decomposed plant parts collected from kitchen or yard waste. (1 point)TrueFalse31. It is estimated that there are thousands of satellites, pieces of old booster rockets, nuts and bolts, and a long list of scrap material left in orbit above the Earth. (1 point)TrueFalse32. The Department of Transportation (DOT) is in charge of all forms of transport systems and vehicles. (1 point)TrueFalse33. Modern thermal power plants generate power basically the same way that old steam engines do. (1 point)TrueFalse34. The great Trans Alaska Pipeline System (TAPS) began oil transport in 1977 and has maintained the highest flow rates since it began. (1 point)TrueFalse35. All of the following power plants are considered thermal power plants because they heat the steam that works the generators, except (1 point)nuclear power plantscoal burning power plantsfossil fuel power plantshydroelectric power plants36. Most crude oil is delivered from terminals to refineries by: (1 point)tanker jetscargo trainsunderground pipelinesoff shore drills37. "Green Power” clean energy production refers to all of the following new power sources except for : (1 point)wind generatorsgeothermal energysolar energy panelsnuclear fusion38. All of the following are important integrated pest management (IPM) strategies, except: (1 point)using good bugs to kill bad bugstrimming off infested plant branchesnever sterilizing toolsusing chemicals only when necessary39. All of the following statements are true, except: (1 point)The US is largest producer of corn in the world.Corn is the main cattle and production animal feed in the US.Almost all of the corn grown in the US is exported.Corn alcohol is distilled to make the cleaner fuel called ethanol.40. All of the following statements are true, except: (1 point)Tractors allowed farmers to be more productive and changed human lifestyles.The US is considered a major agricultural nation.Agriculture in the US has to follow the strict environmental laws of the US Farm Bill.There are currently no inspection services for food grown in the US.41. __________________ maintains balance in an ecosystem. (1 point)Sustainable land useGenetic engineeringDeforestationCombustion42. _____________ is a technology which bypasses all natural barriers that prevent different organisms from breeding. The technology removes DNA material from one organism and plants it in a different organism s DNA. (1 point)BiodiversityGenetic engineeringBioremediationHemodialysis43. _____________ is a fuel source made from the byproducts of the agricultural industry such as leftover straw from fields of grain, vines from pumpkin farms, or wood chips from lumber processing. (1 point)FertilizerNuclear energyBiomass fuelsBio-plastic

Answer:
26.T27.C28.B29.A30.T31.T32.T33.T34.T35.D36.C37.D38.C39.C40.D41.A42.B43.C

Question : 10 POINTS for best answer SCIENCE QUESTION?
29. _____ is the waste that is created in the process of making products. (1 point)pre-consumer wastepost-consumer wastee-wasterucksack30. Compost is a rich soil amendment of organic matter that is made from decomposed plant parts collected from kitchen or yard waste. (1 point)TrueFalse31. It is estimated that there are thousands of satellites, pieces of old booster rockets, nuts and bolts, and a long list of scrap material left in orbit above the Earth. (1 point)TrueFalse32. The Department of Transportation (DOT) is in charge of all forms of transport systems and vehicles. (1 point)TrueFalse33. Modern thermal power plants generate power basically the same way that old steam engines do. (1 point)TrueFalse34. The great Trans Alaska Pipeline System (TAPS) began oil transport in 1977 and has maintained the highest flow rates since it began. (1 point)TrueFalse35. All of the following power plants are considered thermal power plants because they heat the steam that works the generators, except (1 point)nuclear power plantscoal burning power plantsfossil fuel power plantshydroelectric power plants36. Most crude oil is delivered from terminals to refineries by: (1 point)tanker jetscargo trainsunderground pipelinesoff shore drills37. "Green Power” clean energy production refers to all of the following new power sources except for : (1 point)wind generatorsgeothermal energysolar energy panelsnuclear fusion38. All of the following are important integrated pest management (IPM) strategies, except: (1 point)using good bugs to kill bad bugstrimming off infested plant branchesnever sterilizing toolsusing chemicals only when necessary39. All of the following statements are true, except: (1 point)The US is largest producer of corn in the world.Corn is the main cattle and production animal feed in the US.Almost all of the corn grown in the US is exported.Corn alcohol is distilled to make the cleaner fuel called ethanol.40. All of the following statements are true, except: (1 point)Tractors allowed farmers to be more productive and changed human lifestyles.The US is considered a major agricultural nation.Agriculture in the US has to follow the strict environmental laws of the US Farm Bill.There are currently no inspection services for food grown in the US.41. __________________ maintains balance in an ecosystem. (1 point)Sustainable land useGenetic engineeringDeforestationCombustion42. _____________ is a technology which bypasses all natural barriers that prevent different organisms from breeding. The technology removes DNA material from one organism and plants it in a different organism s DNA. (1 point)BiodiversityGenetic engineeringBioremediationHemodialysis43. _____________ is a fuel source made from the byproducts of the agricultural industry such as leftover straw from fields of grain, vines from pumpkin farms, or wood chips from lumber processing. (1 point)FertilizerNuclear energyBiomass fuelsBio-plastic

Answer:
29. _____ is the waste that is created in the process of making products. (1 point)pre-consumer wastepost-consumer wastee-wasterucksack30. Compost is a rich soil amendment of organic matter that is made from decomposed plant parts collected from kitchen or yard waste. (1 point)TrueFalse31. It is estimated that there are thousands of satellites, pieces of old booster rockets, nuts and bolts, and a long list of scrap material left in orbit above the Earth. (1 point)TrueFalse32. The Department of Transportation (DOT) is in charge of all forms of transport systems and vehicles. (1 point)TrueFalse33. Modern thermal power plants generate power basically the same way that old steam engines do. (1 point)TrueFalse34. The great Trans Alaska Pipeline System (TAPS) began oil transport in 1977 and has maintained the highest flow rates since it began. (1 point)TrueFalse35. All of the following power plants are considered thermal power plants because they heat the steam that works the generators, except (1 point)nuclear power plantscoal burning power plantsfossil fuel power plantshydroelectric power plants36. Most crude oil is delivered from terminals to refineries by: (1 point)tanker jetscargo trainsunderground pipelinesoff shore drills37. "Green Power” clean energy production refers to all of the following new power sources except for : (1 point)wind generatorsgeothermal energysolar energy panelsnuclear fusion38. All of the following are important integrated pest management (IPM) strategies, except: (1 point)using good bugs to kill bad bugstrimming off infested plant branchesnever sterilizing toolsusing chemicals only when necessary39. All of the following statements are true, except: (1 point)The US is largest producer of corn in the world.Corn is the main cattle and production animal feed in the US.Almost all of the corn grown in the US is exported.Corn alcohol is distilled to make the cleaner fuel called ethanol.40. All of the following statements are true, except: (1 point)Tractors allowed farmers to be more productive and changed human lifestyles.The US is considered a major agricultural nation.Agriculture in the US has to follow the strict environmental laws of the US Farm Bill.There are currently no inspection services for food grown in the US.41. __________________ maintains balance in an ecosystem. (1 point)Sustainable land useGenetic engineeringDeforestationCombustion42. _____________ is a technology which bypasses all natural barriers that prevent different organisms from breeding. The technology removes DNA material from one organism and plants it in a different organism s DNA. (1 point)BiodiversityGenetic engineeringBioremediationHemodialysis43. _____________ is a fuel source made from the byproducts of the agricultural industry such as leftover straw from fields of grain, vines from pumpkin farms, or wood chips from lumber processing. (1 point)FertilizerNuclear energyBiomass fuelsBio-plastic

Question : If Water was in the Oil, would the Water or the oil come out First when Drained?
For me, im askign due to the Residual that is in my Block, im trying to get it out.here is a re-post of my whole entire long wquestion, in seeking to know WHy my car didnt start AFTER the Head was changed until After i put the PCV Elbow on, gave it gas, charged up battery, and THEn it started...START OK, i thought i would ask for your Insight, ive never fully understood WHY my car dd not start back up, although i DID identify that the Battery was Weak (VERY Weak, i had to charge it all night with a Battery Charger now its power has come back, it was made and purchased Brand New in October last year, an Advance Auto "Silver'" by Johnson Control Systems, a.k.a. Interstate Batteries) and that Binky "Forgot to put Gas in the car," as it was under 14 tank.. but im still at a loss. A Brief Run-Down of what happened:1) Head Gasket -BLOWN,- (This is a fact, ALL Symptoms.) Car driven -ONE TOO MANY TIMES,- Warm water added 15 minutes after Car was "Running Hot," I shut it off before IT did.. 2 Hours after adding Water AND 1/2 gallon GAS (It was low on Gas then too) and nothing but "Crankcrankcrankcrankcrank" Same with Jump.. = Milkshake Oil. First time in my almost 28 Years ive Driven a Car EXACTLY One too many times.. and the first time ive EVER seen Milkshake Oil. CAR NEVER HAD MILKSHAKE OIL BEFORE.2) Car Towed Home. Milkshake oil Drained.. New Oil put in, tried to turn it over, also with jump, for 2 or 3 minutes.. New oil i just put in was Milkshake as well after this. Drained out Overnight again. (Now car has Water in it, not freezing night, .. no Oil.)3) Mechanics come, Take head off Car. New Gaskets, Wires, Spark Plugs, Oil, Oil Filter.. Ready to go. HEAD HAD SMALL CRACK LIKE A CROTCH BETWEEN CYLINDERS 2 AND 3. New head Installed, New Gaskets, they said they put some RTV Black Silicone on the Gaskets too... All is well.. i go to turn Car...4) "WHIRRRRRRRRRRRRRRRRR" - One Pitch. I Panic. "Timing?" -- (This car does NOT Have a Timing Belt Nor Chain.. gear Drive this one is.. Sound is EXACTLY likk when my Forf Escort snapped its Timing Belt, 1991 1.9L. Wont Turn.) I say, "Did you guys -Time- The Engine?" They say "We dont have a Timing light, we just put it back together with your New Head and gaskets." I asked if Engine was not Timed right would it not Start, they said "Yeah its possible." I say OK, I pay them, as they just performed Work. (Not done at a Shop.. Done with Tool set in my Driveway, out of their Car.)I ask all Questions about Timing.. Saddened and Confused. AND Worried.5) I wait a few hours.. I decide to look at it again, as i cant come up with an Answer. I look at Engine.. the "PCV Elbow" had FALLEN OFF! (It had always been loose and it still is.) I put it back on.. Turn Key, hoping Battery Power came back a little, it was looooww... --It CRANKED!- I give it Gas.. It ALMOST Started! Battery died again. i ask for a Jump.. Battery wouldnt take the Jump, it was looow... I charge car up for two or three hours at 6 Amps.. CAR STARTS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Im STILL at a Loss as to what happened, and im letting Oil drip out to get the "Water/Antifreeze" that was left over (They said it had pooled up int eh Cylinders) Out.. Also, they cleaned the Replacement head up with Carb & Choke Cleaner, and i took it on the Highway today, and i think some of the Residual Carb & Choke Cleaner is coming out (cleaned via Oil) as well.. so im "Cleaning" the Residual "[censored]" out with Frequent Oil Changes and stuff, as it MUST still be eneding to come out of the Block, the remainder of the Milkshake Oil and Water and all that.So WHAT HAPPENED?? WHY did my car not START right away, im not sure Why?P.S.: There is now 1/2 Tank Gas in, i will use SeaFoam AFTER the Filter, i MAY try it myself if its THAT easy when car is sitting and all is cold, i CAN ee the Filter... and the Battery is fully charged, i bought a used Altertnator as well. Trying to cleanse the Block of the Dolvents and Milkshake Oil and Water/Antifreeze that was left behind, feel like its still in there, some not as much, but im tryin gto get it out, thats what caused the Mustard... Thanks for the Insight, sorry about the Length..Thank You

Answer:
If the head cracked, water leaked into the top of the cylinders on top of the pistons. Once your drain the oil and repair everything and put it back together, run it and change the oil after you feel it has flushed it, you should never have any milky oil again. You only need to change the oil once. If you are still getting milky oil, you still have the same problem. Besides a cracked head, you may also have a cracked block.Putting warm water in a hot engine does not keep you from cracking the block or a head. Before ever adding water to an engine that has gotten hot, you need to let it cool down for an hour or so until it is below 100 degrees at least. When a motor runs out of water and gets hot, it can be up around 250 degrees. Even if you put warm water in it, the most you might get out of your kitchen tap would be around 140, you can still crack the block. Sounds like you need to pull the engine and replace it and start over. Getting it to hot, you can burn up the rings and do all kinds of internal damage that you may not have found yet. You have learned a very costly lesson the hard way.

Question : PLEASE HELP SCIENCE 10 POINTS fro best answer?
29. _____ is the waste that is created in the process of making products. (1 point)pre-consumer wastepost-consumer wastee-wasterucksack30. Compost is a rich soil amendment of organic matter that is made from decomposed plant parts collected from kitchen or yard waste. (1 point)TrueFalse31. It is estimated that there are thousands of satellites, pieces of old booster rockets, nuts and bolts, and a long list of scrap material left in orbit above the Earth. (1 point)TrueFalse32. The Department of Transportation (DOT) is in charge of all forms of transport systems and vehicles. (1 point)TrueFalse33. Modern thermal power plants generate power basically the same way that old steam engines do. (1 point)TrueFalse34. The great Trans Alaska Pipeline System (TAPS) began oil transport in 1977 and has maintained the highest flow rates since it began. (1 point)TrueFalse35. All of the following power plants are considered thermal power plants because they heat the steam that works the generators, except (1 point)nuclear power plantscoal burning power plantsfossil fuel power plantshydroelectric power plants36. Most crude oil is delivered from terminals to refineries by: (1 point)tanker jetscargo trainsunderground pipelinesoff shore drills37. "Green Power” clean energy production refers to all of the following new power sources except for : (1 point)wind generatorsgeothermal energysolar energy panelsnuclear fusion38. All of the following are important integrated pest management (IPM) strategies, except: (1 point)using good bugs to kill bad bugstrimming off infested plant branchesnever sterilizing toolsusing chemicals only when necessary39. All of the following statements are true, except: (1 point)The US is largest producer of corn in the world.Corn is the main cattle and production animal feed in the US.Almost all of the corn grown in the US is exported.Corn alcohol is distilled to make the cleaner fuel called ethanol.40. All of the following statements are true, except: (1 point)Tractors allowed farmers to be more productive and changed human lifestyles.The US is considered a major agricultural nation.Agriculture in the US has to follow the strict environmental laws of the US Farm Bill.There are currently no inspection services for food grown in the US.41. __________________ maintains balance in an ecosystem. (1 point)Sustainable land useGenetic engineeringDeforestationCombustion42. _____________ is a technology which bypasses all natural barriers that prevent different organisms from breeding. The technology removes DNA material from one organism and plants it in a different organism s DNA. (1 point)BiodiversityGenetic engineeringBioremediationHemodialysis43. _____________ is a fuel source made from the byproducts of the agricultural industry such as leftover straw from fields of grain, vines from pumpkin farms, or wood chips from lumber processing. (1 point)FertilizerNuclear energyBiomass fuelsBio-plastic

Answer:
Seriously, you should try to learn and study because if you need others to answer such simple questions there's no way you're going to pass the exam. You can do it on your own, and that is the only way you'll do well on the exam or in anything else for that matter.

Question : I propose that God is an abbreviation, of the three tools that the superpowers use to control the world.?
Gold, Oil and Drugs. The stuff wars are based on. Fear and Doubt are states the general population are whipped into when a new buzz word is released into mainstream media. "terrorism" think about that. I know I have your attention, so please answer me this- When will the people come together and declare with a million voices, we have suffered enough! This illusion we have been "educated" with, to believe any government is protecting us, is crumbling at is foundations. Who out there has survival skills? When all systems are off-line and money provides no nutrients, the transport systems stopped 3 days ago and inner new yorkers have resorted to cannabalism, who has survival skills? Native culture that has long been reguarded as primitive looks like a sustainable system, not reliant on petrolchemical society. community still beats with strong heart too. We are taught things with which they use to blind us. Tell me what you think?

Answer:
with all do respect......i think you are very misguided and incorrect.

Question : Auto AC Repair Question. How to skip an important step???
Hey car gurus. I have a peice of junk car that I don't really care about. So FIRST OF ALL. I am not concerned about the "right way" to do this. I all ready know what that is. I am only looking for a cheap fix here.Situation: This car had a punctured condenser coil. I found another one at the junk yard and replaced it. Now I am going to charge the system with oil and 134a. So far so good. I have all the tools and minimal knowledge to do all of the above. The only thing missing to doing this is pulling a vacuum on the system first. My question is this: I do NOT want to take it in and pay to have this done. Is there a way to 'somewhat' do this my self?I.E. Can I just dump a can of refrigerent in there and let it out the other end until I purge out all of the air? Or anything like that? Can I hook up my ac gagues and suck out the air with my mouth? (eeew gross..hehe) Or will it ever make any difference what so ever if I vacuum a car's AC system before I charge it? WIll it hurt to skip?

Answer:
Well if you are mechanically inclined enough to make a soilder joint I think i can help. First let me say that you should not mix refrigerants, secondly if your old condensor had a hole you will need to add oil, Peg oil you can purchase at any auto parts store with the freon.OK, find an old junk refrigerator, you will need to remove the compressor, cut the line off the compressor far enough that you have room to work with them,You will also have to cut the electrical wires from it.Now, take the power cord and attach it to the compressor and use the ground wire too.Plug in the compressor and see which tube is sucking, this is the tube that you will need to soilder a shrader valve to. This would be the same style of valve that you hook your freon can up to on the car.Once you have soildered that on the compressor you will need to hook up you refrigerant guages one hose from the old refrigerator compressor to the guage block the other off the gauge block to the low pressure side on the car. Open the valve on the guages so that the compressor can start vaccuming out the system. Plug in the old fridge motor and let it run util the guages read -20 vaccum, about 1-3 hours. then close the valve on the gauges with the fridge motor still running, then unplug the fridge motor. Now you are ready to add the oil and freon. Start the cat and turn the AC on High and then add the oil first, then start adding the freon, should hold about 3.0 lbsIf you're not ready to do all this find a buddy with a vaccum machine and ask him to vaccum the system down.

Question : Looking for a "good" job - in the Houston Texas area as Executive Administrative Assistant....Good Company
SUMMARYA high-energy team player who is a results-oriented administrative professional with comprehensive expertise in office management, event planning, telecommunications travel arrangements, corporate correspondence and reports. Serves as an effective liaison between all levels of an organization, ensuring the safety of confidential materials. Maintains the integrity of company policies and procedures by anticipating issues and preventing problems.EXPERIENCEDELOITTE & TOUCHE, LLP – Houston, TexasAdministrative Assistant – 2007Responsible for administrative functions for three Partners and staff of Auditors. Created invoices and tracking- DPS System, weekly and life to date reports (Excel). Coordinated domestic and international travel arrangements, acquired visas and passports as needed, arranged meetings, dinners and etc. to meet with clients (domestic and international). Weekly time reports and expense reports for Partners.ANADARKO PETROLEUM, The Woodlands, TexasSenior Administrative Assistant, 2001-2006Performed daily administrative functions for the Marketing and Minerals Department, including the vice-president. Processed departmental invoices (SAP). Created Excel reports to track contract history for oilandgas abstracts. Designed presentations with PowerPoint. Developed department’s website using DreamWeaver. Coordinated domestic and international travel arrangements and daily calendars. Filed for visas and passports.• Collaborated with college recruitment team to interview students, filter resumes, prepared welcome packages, liaison with schools and the student internship.• Coordinated team-building events, award dinners, and department functions.• Composed confidentiality reports letters as well as served as liaison to upper management.NEUROBEHAVIORAL HEALTHCARE SYSTEMS, LTD, Conroe, TexasExecutive Assistant, Vocational Counselor, 1992-1999Facilitated transition from hospital setting to building long-term residential program, including residential, transitional, and vocational rehabilitation services for individuals with brain injury and neurological impairment. Worked one-on-one with clients. Supervised three assistants. Established daily routines for clients based on individual needs. Organized weekly outings in community. Attended weekly medical rounds with medical team. Participated in family meetings. Tracked behavioral programs. Developed cottage industry vocational program and designed business classes.ADDITIONAL WORK EXPERIENCE•LAWRENCE INDUSTRIES/DAILY OIL TOOLS, Conroe, Texas Executive Secretary, 1989-1992•EXPERIENCE ENRON, Houston, Texas, Administrative Assistant III, 1987-1989•HYDRIL, Houston, Texas, Office Executive Assistant, 1980-1987•BAKER OIL TOOLS, Houston, Texas, Administrative AssistantCOMPUTER SKILLS Microsoft Word, Excel, PowerPoint, Quicken, Money, SAP, Outlook, DreamwWeaver and DPSPersonalEnjoys water sports, golf and jewelry design. Volunteers in the community and performs charity work. (Houston Livestock Show & Rodeo, Jimmy Buffet –Parrot Head, Jr. Achievement and Habitat)EDUCATIONPresently working on Business Degree.

Answer:
Resume looks great . I'd hire you. Good Luck in your job search!

Question : Poll: How would you use this little piece of information?
Motor oil is bad for the digestive system, but it can be a good source of lubrication, and can reduce any discomfort from persistent irregularity. Fried squirrel alledgedly tastes like chicken, but Honda makes good motorcycles. As a stuntman, it's important to know that a good home security system is the best tool you can have, or else you might wake up and find someone has used your computer to get on Yahoo! Answers and ask questions with your account, since these things are incredibly important to the Bureau of Health Statistics. If you ever need to catch a bird, the best thing to use is turtle wax and linoleum, that way they spin out when they go by honking. And then, deer can be used to destroy almost any yard, including, but not limited to scrapyards.

Answer:
Use the oil to cook the squirrel on the exhaust pipe of the Honda motorcycle.... the home security system can be used to as a cooking timer here. Inform the Bureau that you need to catch a bird, wrap yourself in a cylinder of linoleum, and roll over the deer, thus avoiding disaster. By now, your squirrel should be done. ...plate on scrap metal and serve with an ironic smile.

Question : Automotive maintenace tools - need best answer help please!!?
1. For automotive work, common wrench sizes range from:_____ a. 1/8 inch to 5/8 inch (standard) and 6 mm to 60 mm (metric)._____ b. 1/4 inch to 3/8 inch (standard) and 3 mm to 36 mm (metric)._____ c. 1/4 inch to 1-7/8 inch (standard) and 6 mm to 40 mm (metric)._____ d. 1/4 inch to 1-5/8 inch (standard) and 6 mm to 32 mm (metric).2. If a bolt or nut is stripped, a/an __________ wrench should be used to remove the stripped part?_____ a. pipe_____ b. impact_____ c. adjustable_____ d. combination3. When installing an oil filter, you should:_____ a. use an oil filter wrench._____ b. tighten it by hand._____ c. tighten it at least 1 ½ turns._____ d. turn it counterclockwise one full turn.4. After cleaning battery terminals, some technicians use a little chassis grease to:_____ a. insulate the terminals from accidental shorts._____ b. seal the terminals and retard corrosion._____ c. improve the electrical connection between the terminals and cables._____ d. make the terminals easier to remove the next time.5. The specific gravity, as measured with a hydrometer, of a fully charged cell in a lead-acid automobile battery is:_____ a. 13.1 to 16.0._____ b. 12.6._____ c. 7.0._____ d. 1.27.6. If the charging voltage of an automobile electrical system is over 16 volts, the __________ is/are likely to be defective._____ a. battery_____ b. starter_____ c. voltage regulator_____ d. battery cables7. How should an ammeter be connected when checking the load, or current drain, from a battery?_____ a. Red meter lead to positive battery terminal; black meter lead to disconnected end of positive battery cable_____ b. Red meter lead to negative battery terminal; black meter lead to positive battery terminal_____ c. Red meter lead to positive battery terminal; black meter lead to negative battery terminal_____ d. Black meter lead to negative battery terminal; red meter lead to chassis ground8. If there is any doubt about what should be added to a cooling system using a new extended-life coolant after testing the specific gravity:_____ a. flush and refill the system._____ b. consult the vehicle owner's manual._____ c. add water._____ d. add coolant.9. A vacuum gauge is used to:_____ a. detect leaks in the cooling system._____ b. detect intake and mechanical problems in the valve and piston area of the engine._____ c. adjust the flow pattern of fuel injectors._____ d. check ring and pinion gear backlash.10. A good fuel injector should produce a/an:_____ a. oval spray pattern and remain open after firing._____ b. irregular spray pattern and partially close after firing._____ c. circular spray pattern and remain open after firing._____ d. cone-shaped spray pattern and shut off after firing.11. When setting the ring and pinion gear backlash of a differential, for greater accuracy, you should:_____ a. set the clearance between .008" and .010"._____ b. use a hydraulic press._____ c. look up the setting for the specific differential being serviced._____ d. use a smaller clearance setting on differentials that run hot.12. The toe angle is usually set "in at the front," which means that the front tires are:_____ a. pointing toward each other when viewed from the front._____ b. pointing toward each other at the top, inward toward the center of the vehicle._____ c. pointing away from each other at the top, outward from the center of the vehicle._____ d. perfectly parallel to the vehicle.13. When removing a shock absorber, a special tool is used to:_____ a. remove the two bolts at the top._____ b. hold the end of the shock while the nut is removed._____ c. hold the end of the shock while the upper bolt is removed._____ d. remove the nut and two bolts holding the shock in place.14. A/An __________ is used to correct static and dynamic tire imbalance._____ a. drum gauge_____ b. alignment machine_____ c. tire balancer_____ d. tire changer15. In addition to special brake tools, what regular hand tool is needed to assemble shoe type brakes?_____ a. A pair of pliers_____ b. A Phillips-head screwdriver_____ c. A ball peen hammer_____ d. A soft face hammer16. A brake shoe-to-drum gauge is used to:_____ a. adjust the drum to the circumference of the brake shoes._____ b. adjust brake shoes to the diameter of the drum._____ c. determine the placement of the brake drum._____ d. measure the thickness of the brake drum.17. A continuity tester is used to check electrical circuits for:_____ a. improper voltage._____ b. insufficient current._____ c. excessive current._____ d. a broken connection.18. An ohmmeter is used to check the:_____ a. voltage in an electrical circuit._____ b. amount of resistance in a wire or circuit._____ c. amount of current flow in a circuit._____ d. amount of power consumed by an electrical device.19. Most headlights are set:_____ a. horizontally straight ahead, because the low beams automatically drop lower and to the right._____ b. first for the high beams and then for the low beams._____ c. low and to the right._____ d. low and to the left.20. The lower (smaller) the gauge number of an electrical wire, the:_____ a. thinner the wire's insulation._____ b. lower the current-carrying capacity of the wire._____ c. higher the current-carrying capacity of the wire._____ d. smaller the diameter of the conductor.

Answer:
You want us to do your homework for you?How are you going to learn anything that way?

Powered by Yahoo! Answers

Sitemaps: Car Care, Exterior Accessories, Interior Accessories, Motorcycle & ATV, Oils & Fluids, Paint, Body & Trim, Performance Parts & Accessories, Replacement Parts, Wheels & Tires, Tools & Equipment, Automotive Enthusiast Merchandise

Returns Policy | Privacy Policy